Hans Brunner GmbH
About us
Brunner is one of the worldwide leading manufacturers of chocolate molds for all kind of businesses.
Artisanal confectioners and machine supported chocolatiers find a wide range of catalogue molds: All
kind of molds for hollow figurines, praline and bars, molds for transfer sheets and one-shot depositors.
Highest quality spinning molds for hollow figurines are one of Brunners specialties. They are
manufactured from PC sheets by the so called „Thermopressing process“.
The latest development is an extreme small spinning machine „MiniSpin“. It works with special molds
that are based on single cavities and allow private designed spinning molds. The industry can use the
MiniSpin system to produce pre-serial samples for marketing studies. A wide range of hollow designs
are available and can be found at brunnershop.com.
For the industry Brunner develops and produces molds for all kind of molding lines. In the Germany
plant near Munich Brunner produces molds with a length of more than 1200 mm.
At the new established plant in Brazil near Porto Alegre, Brunner produces injected molds in the 600
mm range.
Even combinations of injected and Thermpressed molds can be made to achieve an outstanding leak
proofness for e.g. truffle ball production.
Brunner with its outstanding quality, reliability and technical competence is partner for all customers
from artisanal confectioners to high demanding multinational industrial chocolatiers.
Address
Hans-Brunner-Str. 1
85625 Glonn
Germany
E-mail: info@hansbrunner.de
Phone: +49 809 390860
Internet: www.hansbrunner.de
Contact person:
Markus Gebhart
General Manager
E-mail: info@hansbrunner.de
Products & Services
Hans Brunner offers various designs of chocolate moulds including hollow figures, pralines, bars, lollies, moulds for transfer sheets, one shot depositors, and holographic moulds, suitable for both artisanal confectioners and machine-supported chocolatiers
Desk Spinning Machine
For artisanal chocolatiers and laboratories there are two possibilities to produce hollow figurines.
For the first you can use moulds with an open bottom, which require a complete manual processing. This method needs the lowest investing, but it is very time consuming (manuall production of an hollow figurine).
For the second you can use a spinning machine, which needs self-supporting spinning moulds. This method is linked to less working time, but it requires high investement cost, approx. 8.000 – 10.000 EUR (production of a hollow figurine with spinning machine).
With our new "Mini Spin" desk spinning machine, the investment threshold is significantly lowered and to the same time the manual effort is reduced. So the confectioner has more time for the work with chocolate, filling and designing.
The cost for this desk spinner are approx. one third of the cost for a spinning machine, The needed moulds are usually single cavities, which are filled manually and are closed with clips. Finally they are fixed on the desk spinner and automatically spinned. So the time consuming process to produce the bottom manually is omitted.
12 single cavities can be fixed at the same time to the spinner. The size of the articles is limited to 174 x 100mm. The single cavities can be used in combination with our BLUEFLEX® Carrier also on a spinning machine.
Further information you can find in our online shop or you can contact our customer service at info@hansbrunner.de
Latest Mould Designs
Our designers at BRUNNER have been very creative once again, bringing many new articles. Admire these at our exhibition stand or preview them in the current new highlightsflyer.
